ultrasonic emulsifying machine
The amplitude of ultrasonic mold, the design method of mold design parameters: amplitude for need of welding materials is a key parameter, the equivalent of chromium iron temperature, temperature reach will be welding, temperature too gao will make raw materials lead to structural failure and burning and intensity variation.
Due to different choice of transducer is different, the amplitude of ultrasonic emulsifying machine the transducer output after fit different variable ratio of the amplitude and the welding head, able to work correction of welding head amplitude to conform to the requirements, usually transducer output amplitude for 10-20 microns, and the working amplitude, generally about 30 microns, and the amplitude change of welding head than with the amplitude and the shape of a welding head, front and rear area ratio factors, such as shape, such as transformer, functions, exponential type transformer, such as amplitude, ladder type had a great influence on strain ratio, area ratio is proportional to the total strain ratio before and after.
What are the basic principle of ultrasonic plastic welding machine? Ultrasonic plastic welding is produced through the use of high frequency mechanical movement from heat to connection or reorganization of thermoplastic plastics. By high frequency electric energy is converted to high-frequency mechanical movement.
Once the molten plastic has solidified, clamping force is removed, the horn. Two plastic parts are connected together forming, and as a part of the take out from the jig.
Plastic component is a fast, clean, highly effective, repeatable Ultrasonic emulsifier machines process, consume very little energy. Don't need solvents, adhesives, mechanical fasteners, or other consumables, and strong clean finished components.
Ultrasonic metal welding machine technology, ultrasonic welding is using high frequency vibration wave to the two surfaces to be welded, in the case of pressure, make two surfaces rubbing against each other to form a molecular layer, the fusion between the ultrasound not only can be used to weld hard thermoplastics
Ultrasonic welding is a welding thermoplastic plastics technology, various kinds of thermoplastic rubber pieces of all can use ultrasonic welding processing, without having to add solvent, bonding agent, or other supplements.
More than its advantage is to increase productivity, reduce غير مجاز مي باشدts, improve ultrasonic extraction cbd product quality and safety in production of ultrasonic plastic welding principle is 20 KHZ (or 15 KHZ) generated by the generator of high voltage, high frequency signal, can by changing the system, the signal is converted to high-frequency mechanical vibration, and on the plastic workpiece, through the workpiece surface and the friction and make the transfer to the interface between the molecules of temperature, when the temperature reaches the melting point of the workpiece itself, the workpiece interface rapidly melting, and then fill in the space between the interface,
When the shaking stops, workpiece cooling setting under pressure at the same time, a welding.
برچسب: ،